G-
Thanks for the reply.
Where do you get rubber lube? The guys at Pep Boys had no clue. Well,
they had a clue, but it was for another topic.
-J
At 8:29 AM -0700 9/4/01, Gerard Chateauvieux wrote:
>Jeff,
>
>If you're asking about a semi-eliptic type, they are just pushed on. The
>fastener on the axle looks like a big nail head. If you can get some
>silicon spray or rubber lube in there first, it might make it easier, but
>otherwise just twist as you pull. you'll definately want some rubber lube
>when you put them back on.
>
>Gerard
_____________________________________________________________
Jeffrey H. Boatright, PhD
Assistant Professor, Emory Eye Center, Atlanta, GA, USA
Senior Editor, Molecular Vision, http://www.molvis.org/molvis
mailto:jboatri@emory.edu
|