spridgets
[Top] [All Lists]

Re: Rebuilding the alternator? - model ID.

To: "Michel R. Gagne" <mgagne@unc.edu>, <spridgets@autox.team.net>
Subject: Re: Rebuilding the alternator? - model ID.
Date: Thu, 23 Aug 2001 11:23:48 -0400
Organization: Gould Fiber Optics f7NFJuT02610
References: <B7AA8EBA.26BA%mgagne@unc.edu>
my own GM alternator swap  GM 7127 alternator.
....this page describes what to ask for at the parts counter.
http://teglerizer.com/alternator/Index.html

granted it's Triumph oriented..but it's a good Lucas reference
http://www.vtr.org/maintain/alternator-repair.html

and a Bosch unit swap (ACR18 Lucas internals)
http://hometown.aol.com/idbritcars/boschAlt.html

another 'tech' disclosure...and troubleshooting guide
http://www.mgcars.org.uk/MG_Elec-Tech/alternator.html

again..Triumph oriented... but it's still Lucas and the same references
http://www.vtr.org/maintain/alternator/conversions.html

...should be enough to get you started.

Paul Tegler     ptegler@gouldfo.com    www.teglerizer.com



----- Original Message ----- 
From "Michel R. Gagne" <mgagne at unc.edu>
To: "Ptegler" <ptegler@gouldfo.com>; <spridgets@autox.team.net>
Sent: Thursday, August 23, 2001 10:43 AM
Subject: Re: Rebuilding the alternator?


Is there a model number that you folks recommend?  Or what GM model is it
for.  I've also had a recommendation for an RX7 alternator.
Thanks,
Mike Gagne


> ...actually.... I'd say go to a GM alternator.
> Not so much for the extra output, but once the
> alternator goes into regulation (rev it the first time)
> it doesn't drop out as easily at lower rpms (idle)
> like the stock Lucas unit does.
> 
> No more idiot light at idle.
> 
> Paul Tegler     ptegler@gouldfo.com    www.teglerizer.com
> 
> 
> ----- Original Message -----
> From: "Michel R. Gagne" <mgagne@unc.edu>
> To: <spridgets@autox.team.net>
> Sent: Thursday, August 23, 2001 8:23 AM
> Subject: Rebuilding the alternator?
> 
> 
> Based on my current drain of 20 mA, Paul Tegler correctly timed my battery
> death situation (~ 1week to zilch), I apparently need to replace the diode
> pack in the alternator.  Since I9ve never done this type of surgery before
> is there anything I should worry about as I take on the job.  Is there any
> other bits I should order and replace out of course while it is apart?
> Any and all help as always...
> Mike Gagne
> 74 1/2 Midget



<Prev in Thread] Current Thread [Next in Thread>
  • Re: Rebuilding the alternator? - model ID., Unknown <=