On Fri, 13 Jul 2001 23:34:26 -0500 David Woerpel <dwoerpel@wi.net>
writes:
> Don't use stainless fasteners in critical areas as they may also
> fail.
> BTW, the MGA head is on and correct new studs were used (ARP) and I
> still felt a
> couple stretch. You know the feeling when the torque wrench never
> clicks but
> just keeps turning. I may replace those studs one at a time.
Your problem may be your torque wrench. If it is a "clicker" and you
paid less than $50 for it or you've had it for 20 years and have never
recalibrated it, throw it away (or have it calibrated). You're better
off with a $20 beam-style wrench. I had a cheap clicker that
occasionally wouldn't click and I twisted off a head stud that way.
David Littlefield
'62 MGA MkII
'51 MGTD
'74 MG Midget vintage racer
'88 Jaguar XJ-S
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
|