Bill L wrote:
>
> Hello derf,
>
> make that two.. i need one as well!
I could use a few myself.
Butif you have the later one and an early speedo, remove the needle and
dial off the later speedo, install the early (larger) dial and needle on
the guts of the later speedo, drop the new set up in the early housing,
some dremel work may be needed to the back of the housing, it works.
This also works with the tachs, makes negative ground tachs fit in the
larger housings.
And if you have a 5 speed or 3.7 diff, use an MGB speedo guts, it reads
to 120 mph on the same scale and works damn near perfect using the guts
from a B in a Spridget. (use the 100 mph face)
--
Frank Clarici
Toms River, NJ
Lots of Sprites
http://www.exit109.com/~spritenut
|