Fw: mech fuel pump on a 12V?

SUs don't like much pressure either. I ran an S-W electric pump for years
with my Judson, no problems.  Put the SUs back on to break in the new rings
and gas everywhere! Now I have to dial in a pressure regulator.

Kent

From "Ron Soave" <soavero at yahoo.com>


> Webers do not like high fuel pressure, 3 - 5 psi in my
> experience is fine, and have revved the engine 6500
> RPM easily.  The HS's might need a bit more pressure,
> but it's certainly easy to try it out and switch back
> if necessary.