Clutch master cylinder removal

Subject says it all.  The only way I can see to remove the bottom
bolt that holds the clutch master cylinder to the pedal box is to
unbolt the pedal box and get access from the bottom with an open end
wrench.  I think that is what what Haynes means by remove the two
bolts holding the master cylinder to the pedal box :-)

Anyone have an easier way?  BTW, this is on a 1500 Midget.
-- 
Later,
 Bill                          mailto:w.gilroy@verizon.net

"Facts are the enemy of truth"
77 Midget
90 Shar-Pei