Hello Bill,
Monday, June 11, 2001, 9:02:45 PM, you wrote:
BG> Now to replace the bolts holding the throttle shafts
BG> together. The nuts are not really 5/16, 3/8 or even 11/32. Seems
BG> closest to 8mm. I swear the damn things are not the same size across
BG> any two flats. I will replace them with 2 5/16 nuts ASAP.
Got the answer from Frank in about 5 minutes:
FC> The nuts on the SU throttle shafts are 11/32. (green handled nut driver
FC> works best)
and I even had two green handled nut drives in the tool box. Duh!
--
Best regards,
Bill mailto:w.gilroy@verizon.net
|