Another lister ID'd it as being off of a '64 TR-4. Now I'm trying to
find a vac diaphragm for it. Moss doen't have one for the application.
See below.
Daniel1312@aol.com wrote:
>
> Something that requires 9-11 degrees advance at 1,200rpm, 5-7 degrees at
> 600rpm, 0-2 degrees at 600rpm and no advance below 225rpm.
The advance mechanism is marked 10 deg. Must be a short curve, has 2
light spring instead of a light & a heavy.
>
> Vacuum diaphragm number doesn't look right - would have expected to see a 5
> digit number and letter at the end.
Dunno what to say here; that's the # off the diaphragm shell.
>
> Daniel1312 - I have books with this kind of stuff in!
Look for the TR-4 data, willya?
TIA,
CR
|