spridgets
[Top] [All Lists]

RE: Anyone in NO Cal need a midget rollbar?

To: "'Spridgets'" <spridgets@autox.team.net>, "'mgs@autox.team.net'" <mgs@autox.team.net>
Subject: RE: Anyone in NO Cal need a midget rollbar?
Date: Wed, 1 Nov 2000 10:47:07 +0900charset=windows-1252
That's gotta be a MJB issue.  I forward an email and BCC's my mindspring
account.  THe forwarded message showed up in MS,  but not in the one from
the spridget list.  Weird.

Here's the original message:

From reed mideke [mailto:rfm at cruzers.com]
Sent: Tuesday, October 31, 2000 5:43 PM
To: spitfires@autox.team.net
Subject: Re: Toyota conversion available

FWIW, I saw a toyata powered TR7 in the Moss Landing, CA Pick'n Pull
Took me a second to realize it wasn't stock. Not sure which motor
it was. It seemed to fit under the hood without being leaned over,
so it might have been one of the pushrod motors.

There's also another TR7 and a couple of midgets in that yard. One
of the midgets had a Koni tube shock conversion in the rear, as well
as some interesting sway bars. I took the Koni's (which seem like
the same ones used for the rear of a spit), since $5 a piece  
seemed like too good of a deal to pass up. I'll soon be throwing
my Monroe shocks in the trash ;-)
I also took the roll bar (it wasn't even bolted down). It turns
out that a midget roll bar does NOT fit in a spit. Oh well.
If anyone in Northern CA needs a midget roll bar, you can have it for
the $30 the yard charged me.

Nolan Penney wrote:
> 
> Lying in a junkyard in Maryland is a complete Toyota engine and
transmission converted
> roundtail Spitfire  The junkyard is Voughts, and it's northwest of
Baltimore by about 20
> miles.
> 
[...]

--
Reed Mideke                  rfm(at)cruzers.com
If that doesn't work:        rfm(at)portalofevil.com 
InterBase build instructions: www.cruzers.com/~rfm

-----Original Message-----
From WFO Herb [mailto:froggi at cdsnet.net]
Sent: Tuesday, October 31, 2000 8:30 PM
To: Graziano, Michael
Subject: Re: Anyone in NO Cal need a midget rollbar?


Tell me more Mike.  You didn't say word-one in your message.   Good
thing there's a subject line!
Herb

"Graziano, Michael" wrote:


This message is for the named person's use only.  It may contain 
confidential, proprietary or legally privileged information.  No 
confidentiality or privilege is waived or lost by any mistransmission.
If you receive this message in error, please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify the
sender.  You must not, directly or indirectly, use, disclose, distribute, 
print, or copy any part of this message if you are not the intended 
recipient. CREDIT SUISSE GROUP and each of its subsidiaries each reserve
the right to monitor all e-mail communications through its networks.  Any
views expressed in this message are those of the individual sender, except
where the message states otherwise and the sender is authorised to state 
them to be the views of any such entity.
Unless otherwise stated, any pricing information given in this message is 
indicative only, is subject to change and does not constitute an offer to 
deal at any price quoted.
Any reference to the terms of executed transactions should be treated as 
preliminary only and subject to our formal written confirmation.





<Prev in Thread] Current Thread [Next in Thread>