spridgets
[Top] [All Lists]

Re: Tensile strength of bolts in re: Torque

To: "Peter C." <nosimport@mailbag.com>
Subject: Re: Tensile strength of bolts in re: Torque
Date: Wed, 18 Oct 2000 14:51:00 -0700
Cc: Brad Fornal <toyman@digitex.net>, spridgets@autox.team.net
Organization: WFO Racing
References: <9c.82f071b.271d1237@cs.com> <000301c038d2$87898c40$6c27893e@pbncomputer> <39ED80C7.C61EFD3B@ktc.com> <39EDC7EF.59D508E@cdsnet.net> <4.3.2.7.2.20001018124915.00d09b40@127.0.0.1>
Peter,

April of '67 I was 'ballsy' enough to beat one of Carroll's 'snakes' with my '58
Corvette.   I never smiled so much after a race.  Made my day!
Herb

"Peter C." wrote:

> That was the blue snake with the 2 white stripes, wasn't it?  Would snort
> when encouraged? It must be  a constrictor, since all the imitators bite.
> -
> At 12:35 PM 10/18/2000, Brad Fornal wrote:
> >She also a famous naturalist. As an owner of Boa Constrictors and Pythons,
> >I am
> >badly wanting to add the infamous Shelby Cobra to my collection..............
> >
> >WFO Herb wrote:
> >
> > > This Carol Shelby sure is a busy lady.  Sounds like the type of person 
>that
> > > should have gone into building some kind of race car or at least a fast
> > street
> > > car!
> > >
> > > Charley & Peggy Robinson wrote:
> > >
> > > >   Shelby raced in just about every SCCA event there was in his day.  Was
> > > > a driver, owner and later founded Shelby Racing.  Responsible for many
> > > > innovations in prototype racing.
> > > >
> > > >   CR
> > > >
> > > >
> > > >
> > > > rob thomas wrote:
> > > > >
> > > > > ----- Original Message -----
> > > > > From: <DLancer7676@cs.com>
> > > > >
> > > > > And these were quality bolts with the threads
> > > > > > rolled in and not cut in (that is another fascinating area of
> > discussion
> > > > > > about bolts).
> > > > > >
> > > > > > --David C.
> > > > > >
> > > > >
> > > > > Nice book on the subject by some guy called  Carrol Shelby (sp?)
> > > > > D 1312 put me onto it.
> > > > > Most enlighteneing.
> > > > > Now I fear bits falling off after years of "fastener abuse"




<Prev in Thread] Current Thread [Next in Thread>