spridgets
[Top] [All Lists]

Re: rolling chassis (was chassie, for some reason)

To: Rich Hill <richard.hill@sri.com>, spridgets <spridgets@autox.team.net>
Subject: Re: rolling chassis (was chassie, for some reason)
Date: Thu, 12 Oct 2000 08:36:41 -0500
References: <200010112237.e9BMbfu17406@teamfat2.dsl.aros.net>
Rich,
         I have one of these.... the orphaned parent, a Morris Minor.
Peter C
------
To: british-cars-pre-war@autox.team.net
Subject: Vintage Minor Register launched
Fellow vintagents,
For those that are interested, the Vintage Minor Register is now up and
running - for OHC Morris Minors 1928 to 1931.  Visit our new website at
www.vmr.f2s.com

----------------------------
At 06:33 PM 10/11/2000, Rich Hill wrote:
>FWIW, apparently M comes before J in the MG alphabet.  The M-type Midget was
>produced 1928-1932 with the J-type picking up after that (1932-34).  Either
>one of those is way up on my wish list -- anything with an overhead cam
>driven _through_ the generator would be cool to have!
>
>Rich
>
>'58 AH Sprite
>'79 MG Midget
>
> > Date: Tue, 10 Oct 2000 21:17:00 -0400
> > From: Frank Clarici <spritenut@Exit109.com>
> > Subject: Re: rolling chassie
> >
> > DLancer7676@cs.com wrote:
> >>
> >> In a message dated 10/10/2000 7:58:23 PM Eastern Daylight Time,
> >> walters@mail.softcom.net writes:
> >>
> >> << It's not a Spridget but is
> >> a Midget.  So does my 52 MGTD count?  >>
> >>
> >> Sprite OR Midget = Spridget, any year.  But the TD would count as an LBC.
> >> 8^)
> >
> > Some of you may not know this so.....
> > The original MG Midget was an MG J type circa 1930, then on to the MG PA
> > (1933/34) PB (1935 or so)  TC, TD, and TF thru the 40s and 50s. These
> > were all Midgets well before the 1961 MG Midget made it's debut.
> > There may be others, and my dates may be off a year or so but the
> > Midgets on this list are the new kids on the block.
> >
> > FWIW
> >
> >
> > - --
> > Frank Clarici
> > Toms River, NJ
> > The bug in the rice bowl
> > http://www.exit109.com/~spritenut
> >


<Prev in Thread] Current Thread [Next in Thread>
  • Re: rolling chassis (was chassie, for some reason), Unknown <=