Hi list,
I posted a question about Clutch pin/rod's a while back and NO-ONE replied.
However, while having an e-mail clear out came across exactly the information
I was looking for. The only thing that I now need to know is whether the
measurements are from the centre of the eye to the operating tip (<G>), or
from tip to tip.
I have also had a trip to my local breakers yard and removed Clutch pin/rods
from both Mini and Metro which are the same at 3.5" tip to tip.
Daniel1312
In a message dated 03/03/00 04:04:26 GMT Standard Time, wizardz@toad.net
writes:
<< Well I've come to find the following concerning the pin lengths avail.
that will fit.
--- = info to come
AH MG 948 / 1098cc 2.5" long
MG 1275cc 3.0" long
MG 1500cc 3.25" long
MG MGB (late) 2.75" long
...was at a local LBC parts store today...
picked up a few goodies....
while chatting with the counter guy...
he offered me up the 2.5" pin as the one I needed.
HHHmmmm.. is this a common CATALOG ERROR
(like the 1" LOWERED SPRINGS)
the books were offering up the wrong length pin
for this model year.
So now I wonder.... is this my problem to begin with?
is this what happened to the DPO? I'll have to look at it
this weekend.
thanks again all.
Paul Tegler wizardz@toad.net http://www.teglerizer.com
OBie - '73 BGT - daily driver
http://www.teglerizer.com/mgstuff/ob_description.htm
Punkin' - '78 Spitfire - corner ripping screamer
http://www.teglerizer.com/triumphstuff/spit78.htm
Lil' Greenee - '73 RWA Midget - lady killer
http://www.teglerizer.com/midgetstuff/index.html
>>
|