spridgets
[Top] [All Lists]

Re: MGA advice

To: "Bryan Vandiver" <Bryan.Vandiver@Eng.Sun.COM>, <spridgets@autox.team.net>
Subject: Re: MGA advice
Date: Fri, 28 Jul 2000 22:03:02 -0700
References: <200007281924.MAA13220@shorter.eng.sun.com>
I don't have personal experience with them, but $3500 it sounds like a
bargain.  Main item to check: they have a wood frame.  Can get pricey if
rotten.  Restored, it should bring well over $10k.
David Riker
74 Midget
63 Falcon
70 Torino
http://personalweb.sunset.net/~davidr
----- Original Message -----
From "Bryan Vandiver" <Bryan.Vandiver at Eng.Sun.COM>
To: <spridgets@autox.team.net>
Sent: Friday, July 28, 2000 12:24 PM
Subject: MGA advice


> Some of you may remember that I brought up an MGA I saw about a month
back.
> Well it's now listed in the local paper for $3500. I just got off the
phone with
> the guy, and here's the scoop.
>
> '58 MGA ccomplete - Was driven and parked in his driveway about 14 months
ago.
> When he drove it home, it had not been started for quite a while, and was
> running rough, but was driven approximately 10 miles to his home. It has
not
> been started since.
> red-oxidize paint, with .surface rust along fender beading.
> Body is fairly straight and solid looking.
> two dents on drivers side - one 4x8" in front side fender, and one about
the
> same in rear side fender
> front bumper is bent almost exactly in the middle, but ends look straight.
> the grill is straight, except there is surface rust at the very top where
the
> 'crest' is missing.
> Has decent look wire wheels, with a nice set of Dunlop Gold seals
> The only major rust spots are directly in front of the rear wheels where
is
> paint is bubbled pretty badly in about a 4x4" area on each side.
> Interior is complete, but needs restored, andthe top frame and side
curtains are
> there.
>
> What do you guys think?? I'd especially like to hear from the MGA owners
out
> there. When I looked at it before, it appeared that it really wasn't any
more
> complicated than my Bugeye, and used many of the same components. It looks
like
> it would require a lot less work than my bugeye did, and because it's
pretty
> complete, I won't have to spend 5-years looking for parts like I did my
bugeye.
>
> Regards - Bryan
>
>



<Prev in Thread] Current Thread [Next in Thread>