Re: rear tire rubbing

[Bkitterer@aol.com]

In a message dated 10/6/99 3:13:35 AM, davidr@sunset.net writes:

<< If wire wheel axles are substituted into a disc wheel rear axle to convert
to wire wheels, the diff. housings are different widths.  Can't remember
which is which, but it thought I remembered the disc wheel axle housing is
about 1/2 inch wider than wire wheel axle housing.  >>

For quarter ecliptic sprung cars the diff. housing is one inch (1/2 inch per 
side :-)) narrower for the wire wheels.

Bob and Annice