I had the exact same problem on the exact same cylinder! Be sure you in
fact are getting spark. My problem turned out to be a bad spark plug! If
you haven't yet, pull *that* plug and check it again. My brand new Bosch
plug did not spark! Changed it and all is fine.
Bill
-----Original Message-----
From: owner-spridgets@autox.team.net
[mailto:owner-spridgets@autox.team.net]On Behalf Of Midget02885@aol.com
Sent: Wednesday, September 29, 1999 7:58 PM
To: spridgets@autox.team.net
Subject: bad cylindar
can anyone help me with this one... # 4 cylindar is not responding..
switched to new plugs, new wires, new distributor cap and rotor.
Sprayed carb cleaner around intake manifold to check for vacumn leak,
nothing!
I do have spark to plug but nothing happening. WHY and how can I fix this.
|