Should there be a "not" in there? :)
-----Original Message-----
From: LBCarNut@aol.com <LBCarNut@aol.com>
To: mwalter@luminet.net <mwalter@luminet.net>; spridgets@autox.team.net
<spridgets@autox.team.net>
Date: September 3, 1999 11:43 PM
Subject: Re: More MC questions (problems)
>In a message dated 9/3/99 10:38:07 PM Eastern Daylight Time,
>mwalter@luminet.net writes:
>
>> Now I am at the white ring. The books (both of them) tell me to gently
move
>> the shaft back and forth to dislodge the white ring and subsequent seal.
>> Bull. I've moved it gently. I've moved it moderately. I've moved it like
a
>> backwoods preacher at a come to Jesus meeting. Still no movement.
>
>Michael,
> The rebuild kit should have come with a new one of those washers,
>therefore you can drill it in a couple of places and break it in half and
>then remove it, some people say you can heat it and melt it (I haven't
tried
>that approach) be sure to scratch or score the plunger or the cylinder
walls.
>Hope This Helps
>Peter S.
>Charlotte NC
>
|