Re: Sprite Side Windows

spridgets

Re: Sprite Side Windows

To:	Birch <birch@cadvision.com>
Subject:	Re: Sprite Side Windows
From:	Herb_Goede@amsinc.com
Date:	Thu, 20 May 1999 09:22:36 -0600
Cc:	spridgets <spridgets@autox.team.net>
Reply-to:	Herb_Goede@amsinc.com
Sender:	owner-spridgets@autox.team.net


My suggestion is do not do it.  Don't try to make a bugeye something it is
not.  You will ruin the bugeye and waste lots of money and time.

If you really want a bugeye with roll-up windows, take a later model
spridget and install a bugeye bonnet and tail from a heap.  It is much
easier and you don't ruin a decent bugeye.

Herb

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Sprite Side Windows, Birch Re: Sprite Side Windows, Martyn Ridley Re: Sprite Side Windows, Kate & Gary Bales Re: Sprite Side Windows, Doug Ingram Re: Sprite Side Windows, Ronsoave Re: Sprite Side Windows, Metallian6 Re: Sprite Side Windows, Wiedemeyer Re: Sprite Side Windows, Gerard Chateauvieux Re: Sprite Side Windows and more Questions, Birch Re: Sprite Side Windows and more Questions, Ulix Goettsch Re: Sprite Side Windows, Herb_Goede <= RE: Sprite Side Windows, Phil Vanner Re: Sprite Side Windows, Frank Clarici Re: Sprite Side Windows, Ajhsys RE: Sprite Side Windows, Hanna, Mark RE: Sprite Side Windows, Phil Vanner Re: Sprite Side Windows, Frank Clarici

Previous by Date:	RE: Car covers, BILL
Next by Date:	RE: Sprite Side Windows, Phil Vanner
Previous by Thread:	Re: Sprite Side Windows and more Questions, Ulix Goettsch
Next by Thread:	RE: Sprite Side Windows, Phil Vanner
Indexes:	[Date] [Thread] [Top] [All Lists]