Re: rear dampers question.

[LBCarNut@aol.com]

In a message dated 4/14/99 12:49:53 AM Eastern Daylight Time, DRDohm@aol.com 
writes:

> When I turn the damper assembly while holding the link arm...the bolt just 
>  turns in the bushing.
Don,
   I use a pitman arm puller to pop mine apart, you should be able to thread 
the nut back on to the link so that the threads do not get damaged and whack 
it out of there. Alternatively you can unbolt the link from the spring mount 
and remove the damper and link as an assembly and get it out into the open 
where it's easier to work on.
Regards,
Peter S.