We drill our books using a sharpened thin-walled tube in a drill press.
Works great.
Peter C
---------
At 06:56 AM 12/9/98 -0500, Lancer7676@aol.com wrote:
>Larry--
>
>If not you can always put it into loose leaf format with a 3 hole punch--I
did
>that with my Haynes Manual which was falling apart from use anyway--Now I can
>pull sheets for copying or lay it open to use it. One good idea I came up
>with long ago--when you make the punch in the sheets--before you remove the
>sheets slide them to the side just a fraction and double punch to make the
>holes oblong--the sheets wont bind as you turn them.
>
>---David
>
|