(Clarifying my situation) Removing tie rod end ball joints

[Dave_Vrba@mail.sel.sony.com (Dave Vrba)]

     Hello Listers:
     I need to clarify my situation on removing the tie rod end ball 
     joints.  I do not need guidance on how to get the ball joints out of 
     the steering arm but on how to get the outer ball joint off the 
     threaded tie rod end.  The ball joint connection at the steering arm 
     was relatively easy to disconnect.
     
     But I can't get the nut or the ball joint assembly loose.  This is why 
     I'd asked about reverse threads etc. in previous post.  This would 
     probably explain the "wobbly" condition it stated also.  With the ball 
     joint loose from the steering arm, everything is pretty wobbly.
     
     Hope this clarifies my request for help.
     
     Dave '62 MKII Sprite
     Dublin, CA
     HAN6L14083