-----Original Message-----
From: Herold Faulkner [mailto:faulkner@redshift.com]
Sent: Friday, October 30, 1998 8:02 AM
To: Mark Endicott
Subject: RE: Roller High Lift Rockers
According to their web page the sale items are the 1.5 rockers with bronze
bearings not the needle bearings. These are the "economy" version at $399
on sale. Vizard mentions these in his book.
BTW he also says ".. the standard cam was designed to operate with a 1.245
or so ratio...."
Hal
-----Original Message-----
From: owner-spridgets@autox.team.net
[mailto:owner-spridgets@autox.team.net]On Behalf Of Mark Endicott
Sent: Tuesday, October 27, 1998 7:56 PM
To: Spridgets
Subject: Roller High Lift Rockers
Spridgeteers:
The newest Mini Mania flyer has a "High Lift Roller Rocker" assembly
advertised. They don't say what the lift is but I believe that I have
seen it before and it was a 1.5 to 1 lift. The original rockers are
1.3 to 1 so I have been told. I am wondering if the lighter aluminum
roller rockers with the higher lift would gain me a few horses on a
stock 1275. The only other mod is K & N's with stub stacks inside the
stock housings and very slightly modified SU's. Ideas and thoughts?
Thanks
--
Mark
70 MG Midget
Nashville, TN
|