spridgets
[Top] [All Lists]

Re: road noise

To: Jeff Boatright <jboatri@emory.edu>
Subject: Re: road noise
From: Chris Kotting <ckotting@iwaynet.net>
Date: Fri, 03 Jul 1998 12:05:05 -0400
Cc: Tom Zuchowski <tzuchow@ibm.net>, spridgets@Autox.Team.Net
References: <l03110703b1c24d99d3c9@[170.140.244.186]>
Reply-to: Chris Kotting <ckotting@iwaynet.net>
Sender: owner-spridgets@Autox.Team.Net
Jeff -

You got it backwards:  
Footbrake off rocking = something's loose
Footbrake ON / NO rocking = It's the bearings
Footbrake ON / STILL rocking = It's the kingpins, fulcrum pins,
bushings, etc.

(If there's still rocking with the footbrake on, but it's a lot less,
then you're looking at redoing the bearings AND the kingin
bushings/fulcrum pin, etc.)

Chris Kotting
ckotting@iwaynet.net

Jeff Boatright wrote:
> 
> Could be a front wheel bearing. I had one go in a VW and it was very
> similar to what you describe. One way to test, but not foolproof, is to
> drive for a while and then check knock-off spinner or wheel for excessive
> heat with your hand. When my bearings went, they heated up. Of course, the
> real test is to jack up the front, place your hands at 12 and 6 o'clock
> positions on the tire, and see if you can rock it. If so, you have
> something loose. If the rocking persists even with someone stepping on the
> brakes, then it's more than likely the bearings. If the braking disallows
> rocking, then you need to check for wear in the lower link, lower swivel
> axle bush, or the shock link. This is from memory of reading the tech tips
> at an Australian spridgets site. Sorry, I don't have the URL on me.
> 
> Good luck,
> 
> Jeff
> 
> >I've been running country-road shake-down drives on my Bugeye to get the
> >remaining 9-year-storage-related bugs out (had a float stick last night--
> >went through 1/4 tank of gas while looking for a place to pull off!).
> >
> >Anyway, I notice that there is a lot more "road noise" (a deep rumbling)
> >when making sweeping left turns on a winding highway road. The noise is
> >still there at a very reduced volume when going straight, and pretty much
> >goes away when making sweeping right turns. It doesn't really sound like a
> >bearing to me, but then I don't think I've ever heard a wheel bearing going
> >bad before, so I couldn't say for sure.
> >
> >Does anyone have any ideas?
> >
> >Thanks
> >
> >Tom Zuchowski
> 
> Jeffrey H. Boatright, PhD
> Editor-in-Chief, Molecular Vision
> http://www.emory.edu/molvis
> "Seeing the Future in a Very Tiny Way"

<Prev in Thread] Current Thread [Next in Thread>