Jim:
Answer is Yes to both questions. Obviously the pipe clips/flanges that are
involved go between the bolt head and the steering rack (in one case), and
between the stud nut and inlet manifold (in the other case).
Daryl
----------
> From: Jim Henderson <jphender@inav.net>
> To: spridgets@autox.team.net
> Subject: More little questions
> Date: Friday, January 02, 1998 7:32 AM
>
> Hi Folks,
>
> Another little question:
>
> Does the pipe that goes under the radiator use the
> same bolts as the steering rack?
>
> Does the heater pipe that travels on the manifold side
> of the engine bolt to the intake manifold?
>
> Boy, I should have bought a Polaroid before starting
> this project. I simply don't remember where everything
> goes. Hey, I'm all for doing things "right" but perhaps
> disassembly/reassembly could have been done in stages
> rather than all at once.
>
> Thanks!
>
> Jim Henderson
>
> '69 Sprite MKIV
|