On 11/28/97 10:44 PM so and so Adrian said. (And I quote)
Cam??
If higher compression pistons do they interfere with the valve openings?
Just trying to help
Larry
>Sorry...I didn't think about that. The tops are flat, no indentions on
>top (higher compression pistons). The arrows are on top of the piston
>reading ".020 -->" or something similar, with the arrow supposed to be
>pointing at the front of the engine. (Of course, I know the .020 is the
>"over" bore...after all, I paid them to bore it over that way!)
>
>thanks,
>
>adrian
>
>Larry Macy wrote:
>> Are the arrows on the pistons or on the rod caps? If on the pistons do
>> the pistons have half moon cut outs like a dent in the top of the piston?
>> if they do ( and they are in the right position in the first place) You
>> are screwd. If they are flat it shouldn't be a problem with rotating them.
>> I will be corrected.
>
>--
>__________________________________
>email: adrian@icx.net
> adrian@utk.edu
>
>"How about going back to sleep for
> a few minutes and forgetting all
> this nonsense" -Gregor Samsa
>
> http://user.icx.net/~adrian/
> http://user.icx.net/~adrian/midget/
> __________________________________
|