Good luck finding a Hardware Store these days... Home Depot and Lowes
have run the *real* hardware stores out of business. I have yet to find
exact matches. Most of the bolts are UNF 5/16 and UNF 3/8 which limits
the choices and the lengths are in 1/8" increments while hardware stores
will have lengths in 1/2" increments. Also, be careful with anything
inside the engine. These are tempered for a high-torque and are not
OTS. For generic hardware, you might try finding a fastener supply
house in your area but you may end up buying by the gross.
The closest thing I have seen to a Bolt List is the Torque chart in the
Bentley Shop Manual. Between it and the exploded views, you could put
together a decent list with a little trial and error. I still think
it's cheaper to order from Spitbits...
Gene
> for every nut and bolt.. but the point if this note is this: I'd like
to go
> to the hardware store with a list of bolt sizes, etc. example, 3/8ths
by
> 4
> in bolt... and fill up my basket with my complete list. Is there a
'list'
> of nuts and bolts sizes, quantity, etc?
|