Go with the Socket and Vise method. I drill out some of the bushing material
first also. Makes it easier to push out.
----- Original Message -----
From: "Daniel Parrott" <parrotthead01@comcast.net>
To: "Spitlist" <spitfires@autox.team.net>; "NASS" <nass@yahoogroups.com>
Sent: Wednesday, December 31, 2003 6:33 AM
Subject: Rubber Bushing Removal
> Any advice on the removal of rubber bushing from the upper and lower A
> frames of my front suspension. They seemed to have bonded. I see two
ways;
> drill them out, or use heat and a c-clamp to push the rubber out. Any
other
> ideas?
>
> Dan Parrott
> Savannah, G
|