spitfires
[Top] [All Lists]

RE: 1296

To: <wrgingerich@msn.com>, <EDENMA@aol.com>, <spitfires@autox.team.net>
Subject: RE: 1296
From: "Joe Curry" <spitlist@COX.NET>
Date: Fri, 28 Nov 2003 11:49:22 -0700
Oh, Yes, I guess that is what you said.  By this time the waters are so
muddy, that I'm having difficultyt seeing!  :)

Joe

-----Original Message-----
From: Bill Gingerich [mailto:wrgingerich@msn.com] 
Sent: Friday, November 28, 2003 11:31 AM
To: Joe Curry; EDENMA@aol.com; spitfires@autox.team.net
Subject: RE: 1296

As I said, my 1FM '74 has the larger holes also.

BillG

<SNIP>

... the flywheel I took off the 1FM '74 Spit had
the larger holes.... 

<UNSNIP>  

-----Original Message-----
From: spitfires-owner@autox.team.net
[mailto:spitfires-owner@autox.team.net] On Behalf Of Bill Gingerich
Sent: Wednesday, November 26, 2003 7:18 PM
To: EDENMA@aol.com; spitfires@autox.team.net
Subject: RE: 1296

OK, I'll muddy the waters a bit more.  My '74 (1FM13696IU) has a 3 rail
box,
and the bigger holes in the flywheel.  Yes, I'm confused - sort off.

BillG


-----Original Message-----
From: spitfires-owner@autox.team.net
[mailto:spitfires-owner@autox.team.net]On Behalf Of EDENMA@aol.com
Sent: Wednesday, November 26, 2003 7:49 PM
To: spitfires@autox.team.net
Subject: Re: 1296


Both BillG and Kevin are correct!  My wife's 73 has the smaller holes in
the
flywheel but so did my 74 when I took the 1500 out to install the GT6
engine.
However, another 74 parts car I had a few years back had the big holes
Joe
was talking about.  Mid 74 was when they switched to the single rail box
from
the three rail box.  It appears to me that the earlier box (3 rail) used
the
flywheel with the smaller holes and the later boxes (single rail) used
the
flywheel with the larger holes.  Interestingly enough, my 74 had a three
rail box
with a J type overdrive rather than the more common D type!  Go figure!

Best Regards,

Mark




<Prev in Thread] Current Thread [Next in Thread>