I picked up a 1/2 inch Allen key from Sears for this. at USD11.99 it
was a steal. And didn't break, unlike the 5/16 bolt whose head I
tried to use first.
Donald.
> From: "Walt Fogle" <foglew@hotmail.com>
> Date: Wed, 08 Mar 2000 21:53:35 PST
>
>
> Hello Listers:
>
> Can someone tell me what tool to use to remove the "tipping valve nut" on
> the top of the brake m/c on my car?
>
> Just after installing my rebuilt rear axles, complete with new wheel
> cylinders, u-joints, brake pads, springs, renewed adjusters, etc. the brake
> master cylinder let go all the fluid onto the driver side carpet.
>
> I've pulled the m/c out of the car and will install a rebuild kit. Just
> need to know how to remove the internal nut.
>
> Thanks and best regards,
> Walt Fogle
> '73 Spit 1500
> '69 TR6
>
|