Walt,
Yes the Brake warning light will go out when you remove the connector from
the PDWA. With this disconnected the switch in the PDWA will look like it is
"open" to the rest of the circuit.
Ralph Jannelli
Matthews, NC
'65 Spitfire MKII
'72 Spitfire MKIV
'80 TR8 DHC
.
----- Original Message -----
From: Walt Fogle <foglew@hotmail.com>
To: <spitfires@autox.team.net>
Sent: Tuesday, September 21, 1999 10:57 PM
Subject: PDWA switch follow-up question
>
> Hella Again:
>
> Thanks to those who responded to my first message regarding the PDWA and
> electrical switch. Another question for you to ponder. (and, hopefully,
> answer!) Should the brake warning light go out when the electrical
> connector is pulled from the nylon switch unit that screws into the PDWA?
>
> My light stays on when this is done. It seems that the bulb should
> extinguish when this connection is broken, unless the connector is shorted
> out. Any thoughts on this one?
>
> P.S. I can't test the connector with my multimeter until tomorrow.
>
> Thanks and best regards,
>
> Walt Fogle
> "73 Spitfire 1500
>
|