At 11:03 AM 5/5/98 +0000, James wrote:
>I seem to have made a mistake removing the upper ball joint, one that is
>realy horible.
<Horrible Description snipped>
First thing I would try is tightening the joint back up as Vic suggested.
If that fails, you can use a Dremel (high speed drill) with a small cutting
wheel to make a screwdriver slot in the end of the threaded part. That
way you can hold it against the action of the nyloc nut.
Why do things like that only happen to the GOOD parts?????
Atwell Haines
'79 Spitfire (marmot-free, for now)
|