I run that combination without a problem. They work as well as the
stock plugs and wires.
Mike
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
Sent: Wednesday, July 26, 2006 9:34 AM
To: shotimes@autox.team.net; TechSHO@topica.com
Subject: [Shotimes] Accel wires and fitment with AGSP-32-FM plugs
I had spoken to Josh at SHOnut a while back about the fitment of the
plug
boots to the newer plugs, I had issues on my 94 Opal Frost with Taylor
wires
and the FM plugs. Josh said that he believed the new Accel wires were
designed taking the difference in height into account, but he had not
recieved his first few sets yet to test. Has anyone else out there
tested a
set of FM plugs with the Accel wires and can confirm thier sealing to
the
valvecover with the added plug height? I have a customer wanting a full
100k
an he needs plugs and wires too, so I want to make sure I get him
something
that won't be a future problem if he takes the car out in the rain.
Course
my solution was to go back to the AGS32PP plugs, but something in me
liked
the way my car ran on those better anyway.
Thanks
Bruce J Malachuk
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|