NAPA 26442 is the number you want.
Paul
----- Original Message -----
From: TBailSHO@aol.com
To: shotimes@autox.team.net
Sent: Wednesday, July 12, 2006 10:09 PM
Subject: [Shotimes] Crush Washers
Thanks to all of you who responded to my brake question of a couple weeks
ago. With regard to my issues I have a box with four new brake hoses
waiting to
be installed and I have a Motive Pressure Bleeder in the mail (something
I've
wanted for a while anyway). I didn't fabricate the questions for the group,
but almost would consider it due to the feedback I got on a somewhat
technical
problem. Its refreshing to know we are interested in more than how shiny a
wheel or how many watt sound system we can cram into our rides.
I do have another brake related item to ask about. Something tells me
when I put the new hoses on, I should also replace the crush washers at the
banjo fittings. Must be an old memory, but I think those things can be
flattened
out to where they are difficult to remove or perhaps break, particularly
since they've not been touched in 15 years. I stopped at the local NAPA
store and
they opened a catalog to a page with about 15 washers pictured along with
dimensions for each and asked which ones I'd like. I told them the proper
one
for my car and they said they aren't listed that way. You just have to know
the
right size. Sounded pretty screwed up to me, so----anybody been through
this? I could go to the dealer, but would rather not, and do you think I
should
have some on hand before I start taking the lines off?
Thanks again for sharing of the knowledge. Just think, if we'd all
bought Honda Accords we wouldn't know nearly as much! We have one and
nothing
ever happens.
Tom Bailey
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|