So, do you set these with an air hammer and bucking bar like with solid
aircraft rivets? Just with a lighter touch? Or does it have to be with a
squeezer?
Sent from my iPhone
> On Jul 30, 2026, at 2:35â?¯PM, Mark Miller <markmiller@threeboysfarm.com>
> wrote:
>
> I got curious; here's a couple:
>
> https://www.grainger.com/category/fasteners/rivets/tubular-rivets?attrs=Shank+Diameter%7C0.0625+in&filters=attrs&searchQuery=Semi+Tubular+Rivets&sst=4
>
> https://www.rivetsonline.com/rivets/semi-tubular-rivets?campaign=22321850377&content=&keyword=&gad_source=1&gad_campaignid=22321853011&gclid=CjwKCAjw7KvTBhA6EiwAWnutYbDhzcsqlMCfFbuuR5v4YM_WtXrOJBfqf-2ksKKhJCk_oLXCqGtEuBoCd18QAvD_BwE
>
> Regards,
>
> Mark Miller 707-490-5834
> markmiller@threeboysfarm.com
>
>> Message: 1
>> Date: Wed, 29 Jul 2026 16:26:01 -0500
>> From: "john niolon" <jniolon@att.net>
>> To: "shop-talk" <shop-talk@autox.team.net>
>> Subject: [Shop-talk] itty biity rivets
>> Message-ID: <1UnFUvDuyu.GQaDBfBGfbf@johns-desktop>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>
>> I need what I call rivets but they might have a different name... they
>> aren't pop rivets since there is no stud in the middle
>> the id of the hole is 1/16" and the "smashed" diameter is 5/32" any one
>> have a clue on a source
>> thanks
>> john
>>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/james.f.juhas@snet.net
>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|