Re: [Shop-talk] wiring an LED tube

[Pat Horne <patintexas@icloud.com> 2903e8d5c8f:6.0.138,18.0.572,17.0.605.474.0000000 definitions=2020-02-14_11:2020-02-14_02,2020-02-14_11,2020-01-23_02 signatures=0 spamscore=0 suspectscore=0 mlxscore=0 mlxlogscore=393 bulkscore=0 adultscore=0 clxscore=1015 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2209130000 definitions=main-2303060017]

Ok, that helps explain things. Most lights marked T5 are intended to go 
into florescent fixtures, this one does not. I looked up that model 
number & came up with a listing on eBay that shows that there is a 3-pin 
connector on one end of the light. There appears to be a wiring diagram 
on the back of the lamp but it doesn't show which pin is which. 
Hopefully you can find a power cord that matches your lamps so you can 
figure out which pin is which.

Peace, Pat

On 3/5/2023 7:37 AM, Tim . wrote:
> ONLYLUX T5
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive