shop-talk
[Top] [All Lists]

Re: [Shop-talk] Wiring a 230v 50hz heater for U.S. 220v 60hz supply

To: Jim Franklin <jamesf@groupwbench.org> please include it with any abuse report [68.6.71.98]:58301 DCWahVl1YqZUOb8uv/Z4bFjN88xQNb50hyok7JPHyXIcLDGJHtQ8xIUL7qTVB1D3IpOibrmvcsfCcIeYCyvW4KaDa3DB+MiBGB8=
Subject: Re: [Shop-talk] Wiring a 230v 50hz heater for U.S. 220v 60hz supply
From: Mike Rambour <lists@dinospider.com>
Date: Fri, 21 Oct 2022 21:29:45 -0700
Cc: shop-talk@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <49ED7F1D-9B5B-48C4-9881-BA0CAFF02DE7@groupwbench.org>
 Years ago I brought back a Raclette machine from France.   It was designed for 
50hz and I wired it into a USA 60hz 220v with modified plug and it works fine, 
still does.  

Now you can buy raclette machines here in the USA but near 20 years ago you 
could not

 Mike

Sent via rubber ducky

> On Oct 21, 2022, at 20:32, Jim Franklin <jamesf@groupwbench.org> wrote:
> 
> I can't speak for that unit but a UK friend brought his tea kettle to the 
> US and wired it to fit in a 220v dryer outlet. But he's a EE...
> 
> jim
> 
>> On Oct 21, 2022, at 6:29 PM, Scott Hall <scott.hall.personal@gmail.com> 
>> wrote:
>> 
>> Guys,
>> 
>> I'm in France right now. I'd like to buy what amounts to a hot plate here. 
>> The company that makes these sells them all over the world. In France (where 
>> the manufacturer is located) they're about $300. In the U.S., they're about 
>> $900. A huge chunk of that is just how common they are in France and 
>> uncommon they are in the U.S.--at home they're sold through a partner 
>> licensee.
>> 
>> Anyway, the one I'd buy in France has a French plug on it for 230v 50hz 
>> supply. The specialty retailer offering it says I can replace the plug with 
>> a U.S. 220v plug and it'll work just fine. Either cut it and wire on a dryer 
>> plug or unscrew the plug in the unit and install a dryer plug. This is also 
>> coming from a sales guy.
>> 
>> The electronics are are literally an electric resistance coil sunk in an 
>> iron plate and a thermostat dial, and a light to indicate when it's at temp. 
>> I'm trying to come up with his any of those would change with the 10hz 
>> frequency difference.
>> 
>> The U.S. version is at least cosmetically identical, and literally the only 
>> parts aside from the coil are the thermostat dial and light. The function is 
>> the shape of the iron plate--the rest is just a heating blanket. I wouldn't 
>> want to switch it to 120v U.S.--it would take forever to get up to temp. and 
>> to recover during use.
>> 
>> Does it seem reasonable that I can just swap out the cord? Any thoughts?
>> 
>> Thanks fellas.
>> 
>> Scott
>> _______________________________________________
>> 
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/pipermail/shop-talk 
>> http://autox.team.net/archive
>> 
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/shop-talk/jamesf@groupwbench.org
>> 
> 
> _______________________________________________
> 
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/lists@dinospider.com
> 

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>