--===============0665332667240395182==
boundary="=====================_3040007==.ALT"
--=====================_3040007==.ALT
LIke Phillip, I came late to this party. Back in 2008 I replaced my
rusted metal
erector set shed with a nice 10x12 vinyl shed, in the same place as
the old shed.
The old shed was put up on a handfull of cinder block piers and then
had the metal
floor/foundation frame, and covered with plywood. Eventually, the
plywood failed
and I fell through the 6". That's when I decided I'm put up the new
shed instead
of trying to fix the curret one.
But there was a problem, that part of my back year has a tendency to end up
underwater when we get our spring & summer rains. To take care take care of
this, I built a perimeter of garden timbers, 2 high, which I staked
in place by drilling
some holes through the garden timbers and driving some rebar through and into
the ground.
Fortunately, my best friend worked in construction driving a dump
truck brought over a load of crush & run, which you can get from Home
Depot, Lowes, etc. to
fill the frameto a depth of about 3". Then covered the crush & run
with dirt, and
used a tamper, again compliments of my buddy, which can be rented from Home
Depot, etc. We covers dirt foundation with a very thick plastic
vapor barrier and
then used solid cinderblock for the flooring. Once the foundation was complete
we started erecting the shed.
Here's a short article I did about the project:
https://www.gomog.com/BLAIR/other/Shed/shed.html
and if you want email me and I can send you the pictures of working
on the foundation and putting up the shed.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
From Dennis Prager - The American Trilogy:
e pluribus Unum, "from many, one."
In God We Trust
Liberty - the power of choosing, thinking, and acting for
oneself; freedom from control or restriction
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
--=====================_3040007==.ALT
<html>
<body>
<font size=3><br>
LIke Phillip, I came late to this party. Back in 2008 I replaced my
rusted metal<br>
erector set shed with a nice 10x12 vinyl shed, in the same place as the
old shed.<br><br>
The old shed was put up on a handfull of cinder block piers and then had
the metal <br>
floor/foundation frame, and covered with plywood. Eventually, the
plywood failed<br>
and I fell through the 6". That's when I decided I'm put up
the new shed instead<br>
of trying to fix the curret one.<br><br>
But there was a problem, that part of my back year has a tendency to end
up<br>
underwater when we get our spring & summer rains. To take care
take care of<br>
this, I built a perimeter of garden timbers, 2 high, which I staked in
place by drilling <br>
some holes through the garden timbers and driving some rebar through and
into <br>
the ground. <br><br>
Fortunately, my best friend worked in construction driving a dump truck
brought over a load of crush & run, which you can get from Home
Depot, Lowes, etc. to<br>
fill the frameto a depth of about 3". Then covered the crush
& run with dirt, and<br>
used a tamper, again compliments of my buddy, which can be rented from
Home<br>
Depot, etc. We covers dirt foundation with a very thick plastic
vapor barrier and<br>
then used solid cinderblock for the flooring. Once the foundation
was complete<br>
we started erecting the shed. <br><br>
Here's a short article I did about the project:<br><br>
<a href="https://www.gomog.com/BLAIR/other/Shed/shed.html"; eudora="autourl">
https://www.gomog.com/BLAIR/other/Shed/shed.html<br><br>
</a>and if you want email me and I can send you the pictures of working
on the foundation and putting up the shed.<br><br>
John<br><br>
</font><div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon";
target="_blank"><img
src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif";
alt="" width="46" height="29" style="width: 46px; height: 29px;" /></a></td>
<td style="width: 470px; padding-top: 12px; color: #41424e;
font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height:
18px;">Virus-free. <a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link";
target="_blank" style="color: #4453ea;">www.avast.com</a>
</td>
</tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1" height="1">
</a></div></body>
<br>
<div>John T. Blair WA4OHZ email:
jblair1948@cox.net</div>
<div>Va. Beach,
Va
Phone: (757) 495-8229</div>
<br>
<div> 48
TR1800 48 #4 Midget 65 Morgan 4/4
Series V (B1106)</div>
<div> 75 Bricklin SV1 (#0887)
77 Spitfire 71 Saab Sonett III</div>
<div>
65 Rambler Classic</div>
<br>
<div>Morgan:
<a href="http://www.team.net/morgan"; EUDORA=AUTOURL>
www.team.net/morgan</a></div>
<div>Bricklin:
<a href="http://www.bricklin.org/"; EUDORA=AUTOURL>www.bricklin.org</a>
</div>
<br>
<div>If you can read
this
- Thank a teacher!</div>
<div>If you are reading it in English - Thank a Vet!!</div>
<br>
<div> From Dennis Prager - The American Trilogy:</div>
<div> e pluribus Unum, "from many,
one."</div>
<div> In God We Trust</div>
<div> Liberty - the power of
choosing, thinking, and acting for </div>
<div>
oneself; freedom from control or
restriction </div>
<br>
<br>
</html>
--=====================_3040007==.ALT--
--===============0665332667240395182==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============0665332667240395182==--
|
![https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif"](https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif"){kind=link}