"...plus 14/3 wire between them..."
In general, this may be true. But I have three-way light switches in
my house that are on 20A breakers,and thus would require 12 ga. wire.
Jeff Scarbrough
Corrosion Acres, Ga.
On Sat, Jan 16, 2021 at 11:13 AM Jim Franklin <jamesf@groupwbench.org> wrote:
>
> That's a 3 way switch, for controlling a light form two places, like either
> end of a hallway. It needs another 3 way swicth, plus 14/3 wire between them,
> to work. If you're replacing a regular, one location swicth myou need to
> return this and get the correct one with 2 posts.
>
> jim
>
> On Jan 16, 2021, at 10:59 AM, Tim . <tims_datsun_stuff@outlook.com> wrote:
>
> Embarrassing question here (again):
>
> I am replacing all the outlets (with GFI) and the light switch in the kitchen.
>
> What is the extra post on the right? (not the green one) What I am replacing
> only has three: both wires and the ground.
>
> thanks
> <switch.jpg>_______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jamesf@groupwbench.org
>
>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
|