See Pat, THAT'S why I come here... expert advise.. #10 just as easy to run as
#12... heck, I might have enough #8 to do it too. assuming the line to ground
should be equal gauge, right ??
----- Original Message -----
From: Pat Horne <patintexas@icloud.com>
To: john niolon <jniolon@att.net>
Cc: shop-talk <shop-talk@autox.team.net>
Sent: 9/26/2020 5:14:30 PM
Subject: Re: [Shop-talk] ohms law stuff
________________________________________________________________________________
Actually, that fuse is for the output. It shows a 40A fuse for the input.
If you plan on using the inverter for a short interval you can go with #10 wire
but the wire will get hot, wasting power.
#8 would be better.
Pat Horne
We support Habitat for Humanity
On Sep 26, 2020, at 5:01 PM, john niolon <jniolon@att.net> wrote:

Pat, the fuse on the input size is 15 amp so #12 is still acceptable
Jim, here's the specs
<specx.jpg>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|