shop-talk
[Top] [All Lists]

Re: [Shop-talk] 1/2 socket drive adapter for power auger?

To: Jim Franklin <jamesf@groupwbench.org> definitions=2020-06-13_11:2020-06-12, 2020-06-13 signatures=0 malwarescore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1011 mlxscore=0 mlxlogscore=999 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-2004280000 definitions=main-2006130184
Subject: Re: [Shop-talk] 1/2 socket drive adapter for power auger?
From: Pat Horne <patintexas@icloud.com>
Date: Sat, 13 Jun 2020 15:59:32 -0500
Cc: Shop-talk@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <75E03494-E737-4250-A3B1-755B336E257F@groupwbench.org>
I got around low air flow on a small pancake air compressor I use on a Habitat 
construction site to run air nailers.   I just add a second tank near where air 
is needed with a hose to the compressor. I used a 20 gallon propane tank but 
any tank that will stand the pressure will work.  Helps quite a bit. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jun 13, 2020, at 3:27 PM, Jim Franklin <jamesf@groupwbench.org> wrote:

Ok thanks all. I can't find one for rent anywhere near me, oddly. And I 
don't have the airflow to run a decent pneumatic one. 

I'll drive the first one by hand to test for rocks, then I'll just bit the 
bullet and buy one.

jim

> On Jun 13, 2020, at 1:00 PM, Lee Daniels <lee@automate-it.com> wrote:
> 
> I agree with Dave on the benefits of using an impact driver here. If you don't
> want to buy the impact wrench and can't borrow one, rent one. I think you'll
> be glad you did.
> 
> Here's a video showing this for your exact application (Titan deck foot) -
> makes it smooth and easy: https://youtu.be/nWIQpMoMVlc
> - Lee
> 
>> On Sat, June 13, 2020 08:28, David Scheidt wrote:
>> 
>>> On Jun 12, 2020, at 19:45, Jim Franklin <jamesf@groupwbench.org> wrote:
>>> 
>>> 
>>> I'm going to drive in some small augers & plates as deck footings (Titan
>>> deck foot). They came with a 1/2" drive impact socket. Rather than buy a
>>> corded impact wrench that I will likely never use again, a friend has
>>> offered to loan me his Harbor Freight power auger
>> 
>> 
>> A corded impact will have more torque than that auger. A good cordless or air
>> impact will run circles around the corded one. Can you rent or borrow one?
>> 
>> Hand held augers are limited in torque transfer by having to use the operator
>> as the reaction. Impact drivers us a rotating hammer, and can way out perform
>> a regular tool.
>>> 

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>