shop-talk
[Top] [All Lists]

Re: [Shop-talk] new tool Oscillating tool

To: John Niolon <jniolon@att.net>
Subject: Re: [Shop-talk] new tool Oscillating tool
From: Philip Ethier <pethier7@gmail.com>
Date: Mon, 19 Jan 2015 20:37:59 -0600
Cc: shop-talk <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <576AF9FF54B945D6A042B54600503101@john5043a2d406>
> Enter the Rigid oscillating tool...



>  gotta find more uses for this bad boy


You will, believe me.

Took out a chimney.  Had to fill the hole in the attic floor.  Original is
3/4" boards across joists.  Cut 3/4" plywood to run to centers of joists.
Squared up hole by running oscillating saw along plywood edge.  Inlay fits
perfectly.




-- 
pethier@comcast.net still works also
Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack", Sapphire Blue
2004 Suburban 8.1, Sport Red, the only automatic of the bunch
2005 Lotus Elise, Bordeaux Red Pearl
2005 Subaru Legacy GT Limited, Regal Blue Pearl
http://www.mnautox.com
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Shop-talk] new tool Oscillating tool, Philip Ethier <=