shop-talk
[Top] [All Lists]

Re: [Shop-talk] Compressed Air Lines, RapidAir

To: shop-talk List <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Compressed Air Lines, RapidAir
From: David Hillman <hillman@planet-torque.com>
Date: Thu, 13 Oct 2011 00:01:50 -0400 (EDT)
On Wed, 3 Aug 2011, David Hillman wrote:
>   Unbelievably to me, I searched the shop-talk archives, and found not one 
> mention RapidAir products ( ie RapidAir, Duratec, Maxline ).
>
> http://www.rapidairproducts.com/index.asp
>
>   I refuse to believe that I've found something no here knew about, so... 
> comments?  Experience?  I'm considering installing the Maxline (3/4") system, 
> because the original RapidAir is only 1/2" and apparently rated for 150psi. 
> I may or may not buy the 175 psi compressor I'm looking at, but it seems 
> silly to save a few bucks here.

    Do not ever buy this product.  Do not allow anyone you know ( or, at 
least, like ) to buy it.  Do not believe anything on that website, except 
the price ( and the 'master kit' only has about half what you need for a 
very minimal install ).

    I should've just used regular copper, it would've been so much easier 
and faster, and cheaper, too I think.

    I might even tear this crap down, eat the $200, and replace it with 
copper.

--
  David Hillman
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>