If the holes go right through, another option would be to see if a nut
would go on the end (although this might not be acceptable as it would
be visible)
On 20/06/2011 13:13, John T. Blair wrote:
> At 11:10 PM 6/19/2011, BJNoSHOV8 wrote:
>
> >Is it possible to drill the holes deeper and put threads farther into
> the material?
>
> >Or 3. Just drill and tap the holes for the next larger bolt if
> there's enough
> >metal.
>
> Thanks to all that replied. The consensus seems to be to use the
> helicoil, or go
> to the next size up bolt.
>
> Unfortunately, I don't know if there is enough metal there. This is
> on the outside
> lip of the carb, with just a little ear where the bolts are.
>
> At to going deeper, good idea but won't work as these holes go
> through the metal. This is an old Zenith carb.
>
> I do like the suggestion about taking it to a small engine repair shop
> and let them
> look at it and doing all 5 holes if I do the 3.
>
> I might try that. The shop may know better than I if there is enough
> meat left
> to go the helicoil route.
>
> While I'm out, I look for either the locktite or Permatex epoxies vis
> just JB Weld.
>
> Thanks again.
>
> John
>
>
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/jblair1948@cox.net
>
> John T. Blair WA4OHZ email: jblair1948@cox.net
> Va. Beach, Va
> Phone: (757) 495-8229
>
> 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
> 75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
> 65 Rambler Classic
>
> Morgan: www.team.net/www/morgan
> Bricklin: www.bricklin.org
>
> If you can read this - Thank a teacher!
> If you are reading it in English - Thank a Vet!!
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/neiljsherry@talktalk.net
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|