shop-talk
[Top] [All Lists]

Re: [Shop-talk] Is a fence part of a shop?

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] Is a fence part of a shop?
From: Drew Rogge <drew@DasRogges.com>
Date: Thu, 14 Apr 2011 09:58:53 -0700
How about setting a piece of steel tubing in concrete and epoxying a steel
rod in the bottom of the posts. Then it's just a matter of slipping the
rod in the tube.

On 04/14/2011 08:50 AM, eric@megageek.com wrote:
> I want to keep my post shop related, but I'm not sure this one qualifies.
> Here goes, yell at me if I'm wrong.
>
> I have a wooden fence around my garden.  The posts are 4X4 2' in the
> ground.
>
> The problem is this time of year when I need to rototill.  I have a
> tractor mounted unit.  To use it, I need to remove one side of the fence.
>
> My question, is there a way to mount some sort of base to the 4X4 that
> would allow me to pull the posts out and place them back in easily?
>
> Since the gate in on this side, the post need to be tight when in the
> ground (so putting a sonotube in the ground would have too much play.)
>
> Any ideas or suggests?
>
> I promise that the winning suggesting will get some fresh veggies from me
> when they come it (if they want them)!
>
> Thanks!
>
> Moose
> "Be as beneficent as the sun or the sea, but if your rights as a rational
> being are trenched on, die on the first inch of your territory." Ralph
> Waldo Emerson
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>