shop-talk
[Top] [All Lists]

[Shop-talk] Tire changer mount, the conclusion

Subject: [Shop-talk] Tire changer mount, the conclusion
From: cavanadd at frontier.com (David C.)
Date: Sat, 26 Feb 2011 11:28:50 -0800
References: <0LH600KEJW3LA300@mta3.srv.hcvlny.cv.net>
Did we talk about welding a piece of square stock to the bottom of the 
tire changer and shoving it into a car's receiver hitch?

Steven Trovato wrote:
> The only problem I see with that is that I don't happen to have a
> conveniently located super-heavy table. One thing I do have, though, is
> cars. So, I was thinking about doing something where the two support
> arms could go to pads under two tires on a car. Haven't tried it,
> though. It's just a concept.
>
> -Steve Trovato
> strovato at optonline.net
>
> At 01:44 PM 2/25/2011, eric at megageek.com wrote:
>
>
>> So, I came up with way that the changer can 'fold' up to my table when
>> not
>> in use, but quickly pulls out and with one nut, tightens super sturdy!
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd at frontier.com

<Prev in Thread] Current Thread [Next in Thread>