shop-talk
[Top] [All Lists]

Re: [Shop-talk] Funny wrench request

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] Funny wrench request
From: Rush <jdrush@enter.net>
Date: Tue, 08 Jun 2010 08:53:28 -0400
I think Armstrong has what you and other LBC lovers are looking for.
https://www.armstrongtools.com/catalog/products.jsp?groupID=848

On 5/21/2010 2:03 PM, Randall wrote:
> Thanks to all for the suggestions.  Looks like the QuadBox is the best
> solution available, so I'm going to run over to my local Ace in a bit and
> see if they have one in stock.
>
> In case anyone is interested, here is a shot of the location in question,
> with the nut already removed.  The nut in the foreground is actually 1/16"
> smaller than what should be in there, so you can see that the flange is
> quite close to the nut.
> http://tinyurl.com/2bzwo3e
>
> And the angle of that shot makes the area seem rather roomier than it is,
> here's another one (other side, with the pan/flange removed) that better
> shows how close the frame member is:
> http://tinyurl.com/2au5dxc
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Shop-talk] Funny wrench request, Rush <=