If you can stake those brads then it sounds like a blind rivet would perform
better.
----- Original Message -----
From: "Steve Hammatt Mount Vernon WA USA" <gsteve@hammatt.com>
To: <shop-talk@autox.team.net>
Sent: Thursday, April 02, 2009 11:30 PM
Subject: [Shop-talk] Re" adhesives......
> Thanks to everyone for their suggestions. I've contacted the Technical
> Support people at Loctite, they were very helpful. The best product
> is a urethane based epoxy. Also, I took the advise to "stake" the ends
> of the brads to slightly mushroom the head to keep the push nut from
> coming loose.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|