shop-talk
[Top] [All Lists]

Re: [Shop-talk] Blast Media

To: nogera2@att.net
Subject: Re: [Shop-talk] Blast Media
From: "David C." <cavanadd@verizon.net>
Date: Thu, 01 Jan 2009 11:41:23 -0800
I would probably use walnut shells if they're aluminum.  Glass beads at 
low pressure would probably work ok, but walnut shells would be safer.

Dave C

nogera2@att.net wrote:
> I need to clean up a fuel pump housing and a couple of SU carbs before
> rebuilding them. What would be the best blasting media for this type of
> metal?
>
> Thanks
>
> Bob
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as cavanadd@verizon.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>