If the heater was meant for 120V and it was connected to 220V, it would burn
out, blow the circuit breaker (or burn up) REAL fast!
But if it was meant for 220v and connected to 120V, it simply wouldn't get very
warm.
Doug
--- On Wed, 12/17/08, Jim Stone <jandkstone99@msn.com> wrote:
> From: Jim Stone <jandkstone99@msn.com>
> Subject: [Shop-talk] Mysterious Stip Heater
> To: shop-talk@autox.team.net
> Date: Wednesday, December 17, 2008, 6:22 PM
> My house has a partially finished attic that is heated by a
> 60" electric strip
> heater.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|