shop-talk
[Top] [All Lists]

Re: [Shop-talk] CO2 And Argon for MIG

To: nogera@worldnet.att.net, Shop Talk <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] CO2 And Argon for MIG
From: Doug Braun <doug@dougbraun.com>
Date: Tue, 1 Jan 2008 17:18:41 -0800 (PST)
I think the standard mix is 75% Argon, 25% CO2.
That's what is in my bottle.

Doug


--- Bob Nogueira <nogera@worldnet.att.net> wrote:

> I have a C02 tank for my MIG. I'm planning on doing
> some Aluminum work  so
> I was checking on switching to Argon, My gas
> supplier says that I will need
> to buy a Argon tank. He also says that a  75%  C02 
> 25% Argon will work
> better for steel than 100% C02. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>