shop-talk
[Top] [All Lists]

Re: armored cable

To: Jim Franklin <jamesf@groupwbench.org>,
Subject: Re: armored cable
From: doug@dougbraun.com
Date: Sun, 05 Feb 2006 18:45:12 -0500
This is an accepted technique for dealing with old, crumbling wiring when
replacing light fixtures, etc. in older houses.

Doug Braun

At 12:46 PM 2/5/2006 -0500, Jim Franklin wrote:

>On Feb 5, 2006, at 12:07 PM, john niolon wrote:
>
>>
>>Jim,
>>
>>maybe an easier fix...  take a piece of heat shrink tubing as long as you
>>can slide on the wire....blow some heat on it with a heat gun OR just shrink
>>the end that's exposed... that will hold it in place and insulate the wire
>>back into the armorflex.. quicker and easier I think
>
>That's a fantastic idea! I will do just that..thanks!




<Prev in Thread] Current Thread [Next in Thread>